The 1949 Kaiser-Frazer’s new body styles showed the limits to innovation

1949 Kaiser convertible

(EXPANDED FROM 3/14/2023)

The recently announced demise of the Tesla Cybertruck got me thinking about the last U.S. automotive startup that experimented with offbeat ideas: Kaiser-Frazer. As with the Cybertruck, a goodly number of Kaiser-Frazer’s ideas didn’t work very well. This is why Tesla management might have viewed the post-World War II startup as a cautionary tale about how trying to be “innovative” can backfire if the execution hasn’t been adequately thought out.

1949 Kaiser Deluxe ad
1949 Kaiser ad. Click on image to enlarge (Automotive History Preservation Society).

Henry J. Kaiser had similarities to Elon Musk. Both did not have prior background in the auto industry — and argued that it needed fresh thinking. Richard M. Langworth noted that “Henry’s clean-slate approach applied to every phase of building automobiles from blank-paper designing to construction of humble bumpers and dashboards” (1975, p. 31).

The first-generation Kaiser and Frazer were sort-of innovative when they were introduced in August of 1946 because they were among the first truly postwar designs. However, the cars were decidedly conventional compared to initial proposals, which included front-wheel drive, torsion-bar suspension and even fiberglass bodies (Langworth, 1975).

By 1949 Kaiser and Frazer cars would become old hat in the face of the Big Three’s first wave of postwar designs. The automaker couldn’t yet afford a redesign so decided to broaden its lineup, which had consisted solely of a four-door sedan. Three body styles were added. To save money, all of the new models — a hatchback, hardtop and convertible — used four-door body architecture.

1949 Kaiser Traveler ad
The Traveler’s price was only competitive with the wagons from other automakers because they were typically priced higher than most other body styles. The fancier Vagabond model cost $200 more than the Traveler (Old Car Brochures).

Utility sedan was a cross between a sedan and wagon

Kaiser-Frazer’s most innovative idea was a forerunner to the hatchback. A two-piece, clamshell-style rear door was carved out of the sedan. The top part opened like a hatchback but the bottom folded out like a tailgate. An uninterrupted flat surface was created when the back seat was folded.

This body style’s biggest problem was that the left back door was sealed shut so the spare tire could be stored without intruding into the cargo area. It looked weird and reduced the roominess and accessibility of the back seat. Another issue was leaks around the hatch doors (Auto editors of Consumer Guide, 2026).

1951 Frazer Vagabond utility sedan interior
The utility sedan’s spare tire might have been better placed at a relatively vertical angle on the right side of the trunk. That would have partly intruded on cargo space but would have made the back seat more usable. Pictured is a 1951 Frazer.

The utility sedan was only offered on the Kaiser during 1949-50. Output for the entry-level Traveler and fancier Vagabond topped 24,000 units, which was almost 26 percent of Kaiser output.

Jack Mueller wrote that this body style appealed to farmers “who were hard pressed to own both truck and car, along with small business owners who needed a carrying vehicle for business as well as a family car” (2005, p. 60). Police and fire departments also saw the Kaiser as a promising ambulance-capable emergency vehicle.

In 1951 the Frazer gained the body style. It garnered almost 28 percent of the brand’s production in its dying year.

1951 Kaiser Traveler 2-door coupe
The circle on the trunk’s floor of these 1951 Kaiser Travelers shows where the spare tire was now located. The cargo floor was raised a few inches over the rear axle. The flowers appear to be too tall to fit into the shallow trunk (Old Car Brochures).

Redesigned Traveler failed despite a big improvement

For 1951 the Kaiser was given a major redesign that resulted in both good news and bad news. The good news was that the spare tire was moved under the rear floor. That allowed the automaker to offer a conventional four-door body style (although a poor-selling, two-door model was added).

The bad news was that the much lower-slung and teardrop-shaped body robbed the trunk of cargo-carrying space. The Frazer, which still used the old Kaiser’s body, had 83.7 cubic feet of capacity with the seat folded and tailgate closed compared to the new Kaiser’s 71.7 cubic feet (Langworth, 1975). To make matters worse, the cargo floor was no longer flat when the rear seat was folded.

Also see ‘The redesigned 1951 Kaiser was not quite anatomically correct’

Production started off weak — under 4,000 units in 1951 — even though the new Kaiser initially sold quite well. Over the next two years output fell off to such a low level that the body style was discontinued for 1954.

I suspect that the stylishness of the new body undercut its utility. Could it be that the Traveler might have carved out a more stable niche if Kaiser had stuck with the first-generation body but made it less weird by moving the spare tire to the trunk? The simplest option would have been to place a covered tire flat in the right corner. However, Kaiser might have also been able to adopt a similar strategy used with the 1951 models, which allowed the tire to fit under the cargo floor by designing a special form-fitting gas tank (Tanks, Inc., 2026).

1949 Kaiser Virginian rear quarter and interior
The hardtop received a sleeker roofline with a wrap-around rear window. Might the sedan have shared this roofline by switching to thin door-window frames similar to early-50s Nashes? Click on image to enlarge (Old Car Brochures).

Four-door hardtop had an odd stylistic quirk

Kaiser-Frazer can rightly call itself the pioneer of the four-door hardtop — a body style that became popular in the mid-50s. Alas, once again the automaker came up with a quirky design that undercut the whole point of the body style.

The hardtop’s biggest problem was that it had a substantial B-pillar post below the beltline. That led designers to fill the space between the front and back windows with a stationary glass panel. It wasn’t as bad as on the convertible (see below), but a thinner sheetmetal pillar would have looked better and perhaps given the car more structural rigidity.

1949 Kaiser Virginian brochure
The Frazer had been positioned as a higher-priced companion brand to Kaiser. Yet for 1949 only Kaiser offered a four-door hardtop. That could lead one to wonder whether the Frazer was being deemphasized (Old Car Brochures).

The hardtop was offered only on the top-end Kaiser Virginian. Its list price ($2,995) was above an Oldsmobile Ninety-Eight Holiday two-door hardtop ($2,973) and an entry-level Cadillac Series 61 ($2,893) four-door sedan.

The Virginian lacked the cachet of its competitors and was underpowered. Kaiser had access to a 226 cubic-inch straight six that produced a maximum of 112 brake horsepower. In contrast, the Ninety-Eight had a trendy new V8 with 303 cubic inches and 135 horsepower.

Only 935 Virginians were produced in 1949-50. For 1951 the hardtop moved to the Frazer line, where 152 hardtops were produced. This represented less than 2 percent of Frazer output.

1949 Frazer Manhattan convertible
The Frazer only had minor stylistic differences with the Kaiser, such as a fancier grille. Why did the automaker think that a two-brand strategy was viable when their products were so similar (Automotive History Preservation Society)?

Kaiser-Frazer revived the four-door convertible

Using a four-door body may have been the only way that Kaiser-Frazer could have afforded to offer a convertible, but one might question whether it was worth it. No other U.S. automaker had offered this body style after World War II, perhaps because they hadn’t sold well prior to the war.

Management may have thought it was okay if their convertible sold poorly because it would function as a halo model. Tooling costs were also lessened because the convertible shared body parts such as doors with the hardtop.

1949 Kaiser

The convertibles were not as overpriced as the hardtop, but they were still in rarified territory. In 1949 the Kaiser convertible went for $3,195 and the Frazer Manhattan for $3,295. That was higher than a Hudson Commodore Custom Eight ($3,041) and Buick Roadmaster ($3,150) but lower than a Cadillac Series 62 ($3,497) convertible.

As with the hardtop, the convertibles had a static piece of glass that stuck up above the B-pillar sheet metal. It looked particularly weird when the top was retracted and side windows rolled down.

1949 Kaiser Deluxe convertible ad
Did ads for the four-door convertible only show the side windows rolled up because marketeers thought that people would find the glass B-pillars odd looking? If so, that seems like a reasonable assumption (Old Car Advertisements).

Convertibles were Kaiser-Frazer’s biggest flop

In 1949-50 only 22 Kaiser and 65 Frazer convertibles were built. As a point of comparison, more than 2,300 Hudson Commodore and 11,000 Buick Roadmaster convertibles left the factory during that same time period.

Langworth noted that a large inventory of unsold 1949 convertibles and hardtops indicated an “extreme failure” of both body styles. “Their prices certainly had a lot to do with that; no matter what was offered, the public didn’t seem able to conceive of either the Kaiser or the Frazer as a high-priced car” (1975, p. 107).

Management belatedly recognized that its prices were too high. In 1951 the sole surviving convertible, which was offered on the Frazer Manhattan, listed for $120 less than previously. That didn’t help much: Frazer output doubled to 131 units.

Langworth may have been right that the convertibles were far too expensive, but perhaps something more was at work. Could it be that a four-door convertible simply wasn’t as appealing as a two door, particularly with the curious B-pillar?

1949 Kaiser line
With a 1949 price cut to $1,995, the base Kaiser Special was positioned well above the Oldsmobile 76 and Buick Special but below the Chrysler Royal, Hudson Super Six and Packard Eight. Kaisers were fairly expensive cars (Old Car Brochures).

New models failed to keep sales from tanking

If Kaiser-Frazer’s expanded lineup was supposed to help it better compete against a veritable Spanish armada of redesigned Big Three cars, that gambit utterly failed. Calendar-year production fell from around 181,000 units in 1948 to only 58,000 in 1949.

To make matters worse, Henry Kaiser insisted on an aggressive production schedule over the objections of Joe Frazer. At that point Frazer quietly stepped back from an active role with the automaker, but his dire predictions turned out to be prescient (Langworth, 1975).

1951 Frazer Vagabond
Kaiser-Frazer had so much unsold inventory from its disastrous overproduction in 1949 that the 1951 Frazer was given a facelift and a full range of body styles. Around 10,000 units were produced (Automotive History Preservation Society).

The utility sedan was the only new body style that made up a meaningful proportion of total Kaiser-Frazer sales in 1949-50. Indeed, all three body styles performed poorly enough that Kaiser-Frazer might have been better off investing its limited resources elsewhere, such as in a more substantial facelift.

That said, the utility sedan made the most sense, partly because it did not require an entirely new roofline. The hatchback was also a better fit with Kaiser’s rather bland but roomy body than the hardtop and convertible. And why did management think that the latter body styles were viable when priced in the same realm as the Buick Roadmaster and lower-end Cadillacs?

A great irony of the redesigned 1951 Kaiser was that its stylishness made it a less practical car, particularly in hatchback form. Might Kaiser sales have been more stable in 1951-54 if it had stuck with incrementally improving its first-generation body instead of trying so hard to be innovative?

NOTES:

This story was originally posted on March 14, 2023 and expanded on Nov. 18, 2026. Product specifications and production figures are from the auto editors ofย Consumer Guideย (2006), ย Flory (2009), Gunnell (2002) and Langworth (1975).


RE:SOURCES

Kaiser-Frazer: The Last Onslaught on Detroit

ADVERTISING & BROCHURES:

0 0 votes
Article Rating
Subscribe
Notify of
guest

12 Comments
Oldest
Newest Most Voted
Kim in Lanark
Kim in Lanark
3 years ago

One of the memes in this magazine is condemnation of Detroit groupthink. But thinking outside the group too often leads to failure. IIRC DeSoto and maybe Dodge had a similar vehicle but with a regular trunk lid and pass through. It also had a folding rear seat. However, the brands also offered standard station wagons. I was always a fan of large 5 door cars, but I seem to be the only one, and it was even so in 1949. Ditto with compacts, except for Nash. BTW, per the heading photograph, I wasn’t aware Mary Kay Cosmetics existed in 1949.

S. Bauer
S. Bauer
3 years ago

I wonder whether trying to introduce a 2-door version of the existing body for ’49 would be a better idea than spending money on the quirky hardtop & convertible, or even the proto-hatchback – soon to be eclipsed by modern all-steel station wagons ?
Probably not; an el-cheapo 2-dr sedan or “club coupe” mostly would have just cannibalized the sales of base 4-door models, and a fancy 2-dr hardtop would have required a lot of completely new stampings and parts such as window mechanisms, which seems overambitious for Kaiser.

Bill McCoskey
Bill McCoskey
3 years ago

I owned a Vagabond hatchback sedan many years ago, at a time where they were only a few hundred Dollars for a running & driving car. The first time I had to remove the spare tire, I wondered why they didn’t make it accessible by opening the left rear door. I finally figured out it was because the bottom half of the door’s internal sheet metal had been removed to make room for the tire. That meant the remaining outer door skin had to be welded shut and the door window fixed closed. The tire was simply too wide and tall, and took up most of the area where the door’s framework would have been.

Only a few years later did Detroit figure out how to make room for a full size spare tire in a wagon, and that solution involved lengthening the rear quarter panels. This allowed the fuel tank to hide in one rear quarter, and the spare tire in the other. Plus, this allowed underfloor storage in the 6 passenger wagons, or a footwell for 9 passenger seating. [Except for the ’57 & ’58 Studebaker and Packard wagons with the 3rd row seating option. Those cars were not equipped with a spare tire. Instead they had special Goodyear “Captive Air” run flat tires.]

The original K-F solution to the spare tire location required far less change than relocating the fuel tank to make room under the floor for the spare. To accomplish that meant the only room for the fuel tank would have been forward of the rear axle, on either side of the drive shaft. The rear fenders were simply too small to put the fuel tank in just one rear fender. To equal the typical size of a fuel tank would have required a tank in each of the rear fenders. It wasn’t until the advent of compact hatchbacks with smaller wheels & tires and/or space-saver tires, that space started becoming available to store the smaller spare tires.

Roadmaster
Roadmaster
3 years ago
Reply to  Steve
Kim in Lanark
Kim in Lanark
3 years ago

Now Kaiser did make a coupe (and a 3 door version) in the 51 redesign. They apparently also did hardtop and convertible prototypes. This is something they could do. If they made a hatchback, they could have made a wagon. There is also a certain public perception at the time. There were several highly publicized auto startups at the time. Most were like Tucker, working on a shoeshine and a smile. However Kaiser was a huge conglomerate, involved in construction, shipbuilding, etc. The public assumed Kaiser had enormous resources. and they had the automotive expertise of Graham. So, Kaiser comes out with two conventional overpriced underpowered sedans. The 4 door hardtop had some potential, but the convertible looked like FDR should be riding in the back. BTW this is the first I heard of the Captive AIr tires. Well over 60 years later, we still can’t get rid of spares. Thirteen years and over 200,000 miles with no flats or punctures. Yet we still have spares.

S. Bauer
S. Bauer
3 years ago
Reply to  Kim in Lanark

The problem is, purchasing stamping dies for a 2-door version of the completely new ’51 body along with the rest of the stamping equipment required for its manufacture is not nearly the same thing as purchasing individual dies for adding additional body styles to an already existing body – for multiple reasons.

Most importantly – with Kaiser’s relatively low output, by ’49 there was probably just not enough time to recoup the cost of the additional dies destined to be scrapped in just a year or two – and I doubt that a 2-door would have boosted sales substantially enough to make such loss of investment worthwhile.

Also, converting a 4-door body to a 2-door configuration can be pretty challenging if the original body has not been originally designed with that in mind – probably downright impossible without excessive expenditure of money and replacing a lot of expensive equipment in some cases. The 4-door hardtop somehow seems to be less challenging from the manufacturing point of view – but my assessment may be off.

Same goes for the wagon, obviously. The hatchback should have been a relatively inexpensive project because it mostly re-used the sedan’s roof stamping (with some modifications – but the basic shape was the same) and many other stamped metal parts; not the case with the wagon, unfortunately – at least if we are considering an all-steel body and not a “woodie”, which has its own set of problems. IMO, the very fact that they went for the hatchback may be a telltale sign that Kaiser just didn’t have the resources to create a “proper” station wagon. Although I admit that the idea of such a “transitional” body type did have some marketing value as well.

john hobson
john hobson
3 years ago
Reply to  Kim in Lanark

I have at least one flat tyre a year. Give me a spare anytime!

James E. Duvall
James E. Duvall
3 years ago

The real lesson of the Kaiser-Frazer saga is that Henry J. Kaiser did not ask the right questions of his “partner”, Joseph Frazer. Launching the 1946 cars was the first step, but the encore needed was more body styles by 1948 model year with hopefully a greater engine variety at least in terms of power. The 1948 Hudson “Step-Down” could not have been a secret in the fall of 1947. Every U.S. auto manufacturer was straining to sell new cars, but rolling out innovations slowly but surely. I don’t know what Joe Frazer told Henry J., but I have to believe that he begged Kaiser to raise more capital to invest on additional tooling and additional models. Yes, interior options were wonderful, but by 1949, K-F cars were now “old”, underpowered and expensive. Those who were there say Kaiser was stubborn and difficult, and believed in his own genius; yet he seemingly did not understand that starting an automobile company required developing the cars in significant ways, which is expensive. Kaiser should have planned on losing money for several years because of a crowded mid-price marketplace: Pontiac, Dodge, De Soto, Oldsmobile, Nash, Buick, Chrysler, Hudson, Studebaker, Mercury and the lowest price Lincoln model. There was one other factor: Local new car dealers. Frazer might have rounded up former Graham-Paige and Hupp dealers for 1946, but building a nationwide network on the basis of two four-door sedans is a thin pancake, in my opinion.

Kim in Lanark
Kim in Lanark
3 years ago

I went down a Pinterest rabbit hole and stumbled across a picture of a first generation KF prototype with a trunk that opened to the side. I don’t see an advantage, but it would seem to make a nice low cost option. James Duvall, you are correct sir. After the post war seller’s market was over, the medium/premium price market became one long game of musical chairs.

Stewdi
Stewdi
3 years ago

I am enjoying this discussion. Thanks Steve and participants!